Skip to main content

WizFi360-EVB-Mini

WizFi360-EVB-Mini

Overview#

This document describes WizFi360-EVB-Mini. WizFi360-EVB-Mini is a compact development board for experiment, test and verification of WizFi360. WizFi360-EVB-Mini is the same form factor as the NodeMCU V2. WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps, which can meet the requirement of various applications.

Feature#

  • WizFi360
    • WiFi 2.4G, 802.11 b/g/n
    • Support Station / SoftAP / SoftAP+Station operation modes
    • Support “Data pass-through” and “AT command data transfer” mode
    • Support serial AT command configuration
    • Support TCP Server / TCP Client / UDP operating mode
    • Support configuration of operating channel 0 ~ 13
    • Support auto 20MHz / 40MHz bandwidth
    • Support WPA_PSK / WPA2_PSK encryption
    • Serial port baud rate up from 600bps to 2Mbps with 16 common values
    • Support up to 5 TCP / UDP links
    • Obtaining IP address automatically from the DHCP server (Station mode)
    • DHCP service for Wireless LAN clients (AP mode)
    • Support DNS for communication with servers by domain name
    • Support “Keep-Alive” to monitor TCP connection
    • Support “Ping” for monitoring network status
    • Built-in SNTP client for receiving the network time
    • Support built-in unique MAC address and user configurable
    • Support firmware upgrade by UART Download / OTA (via WLAN)
    • Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
    • CE, FCC certification
  • ETC
    • Built-in UART to USB chip
      • CP2104-GM
      • Micro USB B Type Connector

Quick Start Guide#

Quick Start Guide

Datasheet#

Download

Technical Reference#

Ref Schematic & Other Board Schematics#

Link to Github

Library#

Link to Github

ETC#

Serial Port Driver#

CP210x USB to UART Bridge VCP Drivers